CL300 Cable Locating Kit

Schonstedt  CL300 Cable Locating Kit
Quick, Easy and more Accurate locating = $avings in time and cost!
The NEW CL300 cable locating kit consists of a portable, holstered pipe & cable locator with an industry accepted 33kHz transmitted frequency. Comes standard with 512 Hz detection capability. With an added 512Hz transmitted device or traceable duct rodder the CL300 becomes the perfect tool for empty duct work locating. This instrument is capable of detecting all electrical, telecommunications and wire circuits—whether direct buried cables or those within conduits—using direct connect or close induction methods. This locator equipment features Auto & Manual adjustments for both transmitter power and receiver sensitivity to assist with a variety of locate work and congestion.

Locate and trace the path for all electrical and telecommunication cables along with buried wire for pumps, irrigation or traffic control systems. The CL300 will also detect tracer wire buried alongside water/sewer or gas pipelines. In SONDE mode, this instrument will detect and pinpoint any device that transmits at a 512Hz frequency, such as an inspection camera, boring equipment or sonde. The CL300 is a great kit for utilities, construction companies and home service contractors needing to mark buried utilities for damage prevention, excavation and facilities maintenance.

CL300 Kit Includes..
*TM70002 Heavy Duty Conductive Clip
*PC60001 5″ Inductive Signal Clamp
*512 Hz Sonde Capable
*Heavy Duty Carrying Case
*3-year Warranty

CL300 Standard Equipment..
The CL300 comes with an extensive package of standard locator equipment including:
*Receiver & Transmitter
Holster (p/n: PC10012)
Conductive Clip Assembly (p/n: PC70000) which includes Standard Conductive Clips — C91010 (Red) and C91011 (Black)
Hard Carrying Case (p/n: PC10100)
Ground Stake (p/n: 208263)
Auto Adapter for Transmitter
Main Charging System (Coverter, Power Supply & Cord) for Transmitter
5 inch Inductive Signal Clamp (p/n PC60001)
Small Heavy Duty Conductive Clip ( p/n TM70002-1)

Add-On Accessories..
The following accessories are available to meet every locating need.
Inductive Antenna (p/n PC20033)
Standard Headset (p/n: XT40000)
3″ Inductive Signal Clamp (p/n: PC60000)
5″ Inductive Signal Clamp (p/n: PC60001)
7″ Inductive Signal Clamp (p/n: PC60002)
Large Heavy Duty Clips – p/n: TM70001 (black) &/or TM70001-2 (red)
Small Heavy Duty Clips – p/n: TM70002 (black) &/or TM70002-2 (red)
Carry-All Bag (p/n: PC40000)
Belt Accessory Pouch & Nylon Belt (p/n: PC30000)
512 Hz small sonde (p/n TM50911)
512 Hz Sonde (p/n TM50910)

Receiver Specifications..
OPERATING FREQUENCY: 33kHz; plus 50Hz/60Hz passive detection (factory selectable)
BATTERY: One 9V battery
BATTERY LIFE: 18 hours (intermittent use)
AUDIO OUTPUT: 10 – 30000 Hz determine by signal strength (line rtn) 0 – 70 db SPL (Sound Pressure Level), volume controlled
OPERATING TEMP.: -4°F to 140°F (-20°C to 70°C)
OVERALL DIMENSIONS: Closed: 17.5″ x 3″ x 8.5″ (44 cm x 7.6 cm x 21.5 cm)
Extended: 27.7″ x 3″ x 8.5″ (70 cm x 7.6 cm x 21.5 cm)
MAX. DEPTH CAPABILITY: Approximately 19’ (5.8 m)

Transmitter Specifications..
OUTPUT POWER: 33 kHz – 1.8 W maximum (conductive mode)
BATTERY TYPE: Rechargeable NiMH pack (7.2V)
BATTERY LIFE: 8 hours (intermittent use)
CHARGING: Smart charger powered by AC supply or vehicle supply
OPERATING TEMP: -4°F to 140°F (-20°C to 70°C)


Call Now Button808-282-9097