Walk-Behind Concrete Saw With 18″ Guard
MK160832
*One-piece construction chassis made from 3/16″ hot-rolled steel that will not flex during operation.
*Blade guard mounts on the left- or right-hand side of saw and cuts within 2″ of wall or curb.
*Depth control assembly engineered for smooth, controlled blade insertion.
*Powder-coated chassis resists peeling & corrosion.
*Positive locking depth control mechanism.
*Cast-aluminum hinged blade guard.
*Stainless steel water distribution system supplies water to both sides of the blade.
*1″ blade shaft supported by two heavy-duty, self-aligning pillow block bearings.
Specifications:
MK-1613H Standard Model
Honda Gas Engine
GX390 Cyclone Power
Blade RPM 2,700
Blade Arbor 1ﾔ
Blade Capacity 18ﾔ
Max Depth of Cut 6-5/8ﾔ
Gas Chain Saw with 16″
Product: US71028
*6.4 hp Gas Chain Saw with
*16″ Guide Bar
*PowerGrit Ductile Iron Chain
*10″ Pipe Clamp
*Storage Bag Package
Husqvarna K1260-16″ Saw
Product: US16790
US16790 Husqvarna K1260-16 7.8hp Saw w/16″ Blade Guard
*Cylinder Volume 118.8 cm3 / 7.25 in3
*Power 5.8 kW or 7.9 HP
*Noise Power 113 dB(A)
*Noise Pressure 103 dB(A)
*Front Handle Vibrations 4.7 (16″) m/s2
*Rear Handle Vibrations 5.5 (16″) m/s2
*Weight 14.0 (16″) kg or 30.9 (16″) lbs
*Fuel Tank Capacity 1.25 L or 2.64 gallons
*US Print Disc Sizes 400 mm or 16 in
*Maximum Periphery Speed 100 m/s
Model 890F4 (8GPM) Hydraulic Pipe Saw
Product: US72008
Hydraulic Chain Saw with 16″ Guide Bar
PowerGrit Chain
Pipe Clamp – Model 880F4
For Use On Ductile Iron Pipe
Power Source: Hydraulic (8 GPM)
Weight: 27.3 lbs (with bar and chain)
Model ACH-GB20 Air Chain Saw Ductile Iron Package
Product: US60469
The special pipe chain allows the Model ACH-GB16 Air Powered Chain Saw to safely and quickly cut ductile iron, PVC, HDPE, and other similar materials.
Cut pipes in the ground safely, easier, and faster with minimal excavation. The pipe clamp reduces operator fatigue and makes safer bottom-up cuts a reality.
Package Includes: ACH-GB20 Air Powered Heavy Duty 7.5 HP Gearbox Chain Saw, Bar, Chain, Storage Bag, (1) Qt. Ice Free Oil, 10″ Pipe Clamp & Chain Extension
The special pipe chain allows the Model ACH-GB16 Air Powered Chain Saw to safely and quickly cut ductile iron, PVC, HDPE, and other similar materials.
Cut pipes in the ground safely, easier, and faster with minimal excavation. Chain saw requires 90cfm of air at 90psi.
Specifications:
Power Source – Gearbox Air Motor
Minimum Air 90cfm @ 90psi
Guide Bar 20″
Weight 32 lbs (with Bar and Chain)
