PT1000 Valve Exerciser

Pacific Tek – Hawaii
PT1000 Valve Exerciser and Operator

Pacific Tek – PT1000 Valve Exerciser and Operator

Click here to contact Pacific Tek Hawaii, or call us @ 1-808-282-9097 for more information, bid specifications, availability or application needs.

Model:PT1000 by Pacific Tek

PT1000 Valve Exerciser and Valve Operator Standard Features:

*Torque can be controlled from 0 to 850 ft. lbs.
*AI system: controller is manual or Automatic.
*Power head is mounted to a carriage that rides the full length of the track.
*Exercise valves from 0′ to 8′ on a trailer or truck.
*Pacific Tek locking system.
*Telescoping 5′ to 8′ square aluminum key and 1-1/2″ to 2″ valve nut adapter.
*Driven by a single hydraulic motor.
*Double chain sprocket in head for strength
*A truck, trailer, or skid mounted valve exerciser and valve operator for opening and closing underground valves.

The PT1000 can operate underground valves from 4″ – 60″ diameter with adjustable torque range from 0 to 850 ft.lbs. It has an operational horizontal reach of up to 8’ and a swing radius of up to 270 degrees. *The unit can be mounted in various configurations, stowing width-wise or length-wise on a custom Pacific Tek trailer, flatbed service vehicle or dedicated single and tandem axle trailers. This unit can be powered from a separate hydraulic unit or vehicle driven one pump system.

TRAILER PACKAGES
PV250 Vacuum Excavator trailer with a PT1000 Valve Exerciser and Valve Operator

**PV250-PT1000-D1HW-T PV100 Vacuum Excavator trailer with a PT1000 Valve Exerciser and Valve Operator.

 

PT1000 VALVE EXERCISERS and VALVE OPERATORS
Model Description..

PT1000  – Slide Head Valve Exerciser and Valve Operator reaches 0-8′ from base to head. This is for units mounted widthwise on trailers or trucks. Valve Exerciser and Valve Operator has 850 ft-lb of torque (No power pack).

PT1000-G  -Slide Head Valve Exerciser and Valve Operator reaches up to 7′ (depending on application). Valve Exerciser and Valve Operator has 850 ft-lb of torque, 14HP direct drive engine power pack.

PT1000-GT – Slide Head Valve Exerciser and Valve Operator reaches up to 7′ (depending on application). Valve Exerciser and Valve Operator has 850 ft-lb of torque, 20HP direct drive engine power pack, selector valve, Class II hydraulic tool circuit, 19 gallon oil tank, oil cooler and retractable hose reel.

PT1000-D1 – Slide Head Valve Exerciser / Valve Operator reaches up to 7′ (depending on application). Valve Exerciser has 850 ft-lb of torque, hydraulic pump and electric switch engage clutch (no power pack – applied to D1 ready component).

PT1000 VALVE EXERCISER AND VALVE OPERATOR KITS:
TRAILER & CARRIAGE
Model Description..

PT1000-G-T PT1000 – Slide Head Valve Exerciser / Valve Operator mounted on a custom trailer. 14hp gas engine direct drive Class II hydraulic pump. 19 gallon hydraulic reservoir. Single axle trailer and can swing out up to 8′ from the base. 850 ft-lb of torque.

PT1000-GT-T PT1000 – Slide Head Valve Exerciser / Valve Operator mounted on a custom trailer. Single axle trailer and can swing out up to 8′ from the base. 850 ft-lb of torque. 20HP direct drive power pack, Class II hydraulic tool circuit, selector valve, flat face connections, oil cooler, 19 gallon hydraulic reservoir, and in-and-out for hydraulic tools 850 ft-lb of torque.

PT1000 – Valve Exerciser and Valve Operator
Power Head Slide Track: The power head is mounted to a carriage that smoothly rides the full length of the track. A deck mounted stowage system is furnished to secure arms for travel.
Power Head: The valve exerciser and valve operator power head is driven by a single hydraulic motor. Output torque can be controlled from 0 to 850 ft/lbs. Double chain drive provides more reliable long lasting operation.
Global Positioning System (GPS) option: Instantly provides latitude, longitude, and altitude.
AI Controller: Automatically and safely cycle through exercising and operating valves. Includes weather resistant, digital touch screen controller.
Reach: Power Head travels up to 8′ from mounting base to exercise and operate valves.
Pacific Tek Position Locking System: Articulating arm is held in place with hydraulic Pacific Tek Locking System.
Mounting Base: Mounting base is 1/2″ thick square plate with a 1-1/2″ pivot post for a swinger arm. A reinforced track is secured to the top of the swinger arm. Can be skid, truck, or trailer mounted.