Transmitter Clamps

Transmitter Clamp

This clamp is used to apply a transmitter signal to a specific cable or pipe. This is particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized. It can be used with the extension rod.

Available in diameter sizes..

Clamp 4″ (100mm)

Clamp 5″ (127mm)

Clamp 8.5″ (220mm) 

Part No: 10/TX-CLAMP-XX (XX= 2, 50, 4, 100, 5, 130, 8.5, 215)